Pages

Thursday, November 12, 2015

Medusa Box v.2.3.9 version v 2.3.9 setup download mediafire

Medusa Box v.2.3.9 is out!

We have added boot repair via USB and small TP for a wide range of LG phones which are detected by PC as "Qualcomm HS-USB QDloader 9008" device!

Also added repair via JTAG interface for:
HTC Desire 300 (0P6A100)
ANDROID DOWNLOAD
Medusa Box v.2.3.9 Release Notes:
- Added support for the following models:
LG D321 (based on MSM8610) - added Dead Boot Repair via USB
LG D325 (based on MSM8610) - added Dead Boot/Phone Repair via USB ANDROID DOWNLOAD
LG D325 (based on MSM8210) - added Dead Boot/Phone Repair via USB (in test mode)
LG D325F8 (based on MSM8610) - added Dead Boot Repair via USB
LG D325G8 (based on MSM8610) - added Dead Boot Repair via USB
LG P700 - added Dead Boot Repair via USB
LG P705 - added Dead Boot Repair via USB
LG P705F - added Dead Boot Repair via USB
LG P705GO - added Dead Boot Repair via USB
LG P708G - added Dead Boot Repair via USB
LG P710 - added Dead Boot Repair via USB
LG P712 - added Dead Boot Repair via USB
LG P713 - added Dead Boot Repair via USB
LG P713GO - added Dead Boot Repair via USB
LG P713TR - added Dead Boot Repair via USB
LG P714 - added Dead Boot Repair via USB
LG P715 - added Dead Boot Repair via USB
LG P716 - added Dead Boot Repair via USB
HTC Desire 300 (0P6A100) - added Dead Boot Repair, Repair CID, Repair IMEI (thanks to Mr. Dr_Wolodya)

- All pinouts and Repair procedures are described in the manual ("Help" button in Software).

Medusa - Ultimate Breakthrough in the Phone Repair!

To repair mentioned above devices via USB, do next steps::
Attach testpoint as shown on Figure 1 in Software manual, and connect phone with Micro USB cable directly to mainboard USB port (don´t use USB hubs!).
Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you had´nt installed a driver. Drivers are in {Installation_Folder}\Driver\QHSUSB. ANDROID DOWNLOAD
Release testpoint and press EasyRepair button in software (or Connect button, when in Advanced Mode).

No comments:

Post a Comment